Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the Mitsubishi Outlander

Model: Mitsubishi Outlander MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Headlight bulb

See other generations:
Video tutorial

Today we will see information regarding the disassembly and replacement of the front headlight bulb of the Mitsubishi Outlander. First, we open the hood of the car and start removing the plastic protective cap of the bulbs; then we pull out the bulb holder and disconnect the low beam bulb, as shown in the video.

At this point, we install the new front headlight bulb, of the correct type and with the same fitting; we reassemble it on the headlight unit and check its operation, also replacing the other bulbs of the headlight if necessary!


Posted on 8 December 2024 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb of the Mitsubishi Outlander
How to Replace the Front Headlight Bulb of the Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) Replacing the right front headlight bulb on a Mitsubishi Outlander follows short and simple steps that you can carry out independently, thanks to our…
Replacement of the front headlight bulb of the Mitsubishi Outlander
Replacement of the front headlight bulb of the Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) These brief instructions will show us how to disassemble and replace the headlight bulb of the Mitsubishi Outlander. First, we open the hood of the c…
How to Replace the Headlight Bulb on a Mitsubishi Outlander
How to Replace the Headlight Bulb on a Mitsubishi Outlander
Mitsubishi Outlander (2007-2012 / MK 2) Today, you will learn how to replace the right and left front headlight bulbs on a Mitsubishi Outlander. To carry out this operation, open the bonnet…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos