Do it yourself
| ||||
|
Mitsubishi Outlander - Video tutorial
Model: Mitsubishi Outlander
MK 3
- Years 2013-2021 Is the bumper of our Mitsubishi damaged? Let's remove the rear bumper and replace it. Let's see how to do it. Lift the tailgate, remove the covers on the sides and unscrew the locking pins located in the rear part of the lights: remove them after disconnecting the power supply terminals. We unscrew the screws placed in the lower part of the bumper, then, we remove the screws placed on the sides of the car's stone guards (under the fender). Once the bumper is free from any screw or pin, let's take it with your hands and pull it away from the bodywork (disconnect any power cables). We replace the bumper with one equal to the one removed.
Posted on 14 March 2024 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.014
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |