Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Disc on a Mitsubishi Outlander

Model: Mitsubishi Outlander MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006
Part: Brake rotors

See other generations:
Video tutorial

Before you can begin, lift the rear side of your Mitsubishi Outlander. Start by unscrewing and removing the bolts that secure the wheel to the hub, then remove the wheel itself.

Next, you will need to disassemble and move the brake caliper away by simply unscrewing the securing bolts. This will free the rear brake disc.

At this point, you will need to unclip and remove the brake disc from the hub, and you will have successfully completed the disassembly. To install the new brake disc, simply repeat these instructions in reverse, and you will have completed the replacement.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

How to replace the rear wheel bearings on a Mitsubishi Outlander?
How to replace the rear wheel bearings on a Mitsubishi Outlander?
Mitsubishi Outlander (2007-2012 / MK 2) In this tutorial, you will learn how to replace the rear wheel bearings on a Mitsubishi Outlander. This operation is simple but requires good manual …
How to Replace the Rear Bumper on a Mitsubishi Outlander?
How to Replace the Rear Bumper on a Mitsubishi Outlander?
Mitsubishi Outlander (2013-2021 / MK 3) To replace the rear bumper on a Mitsubishi Outlander, unscrew the screws that secure it to its housing. These screws are located at the central lower…
Front Disc Replacement on Mitsubishi Outlander
Front Disc Replacement on Mitsubishi Outlander
Mitsubishi Outlander (2001-2006 / MK 1) Unscrew the wheel bolts of the affected wheel, lift the car, and remove the wheel. Next, unscrew the bolts located behind the brake disc. Remove the …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos