Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the license plate light bulb of a Mitsubishi Outlander

Model: Mitsubishi Outlander MK 3 - Years 2013-2021
Part: License plate light

Through this video tutorial, we can see step by step how to change the license plate light bulb of a Mitsubishi Outlander, third series model produced from 2013 to 2021. We start the operation by removing the light bulb fixture by pushing it from the sides towards the inside and then extracting it as shown in the video and removing the connector from the socket. Once this is done, using a small flathead screwdriver, we open the fixture and remove the old bulb to replace it, finally we insert a new bulb and reassemble everything following the reverse procedure.

Posted on 14 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Number Plate Bulbs on a Mitsubishi Outlander
Replacing the Number Plate Bulbs on a Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) This guide outlines the main steps to remove and replace the number plate bulbs on a Mitsubishi Outlander. First, move to the rear of the vehicle and…
How to change the language on the onboard computer of the Mitsubishi Outlander
How to change the language on the onboard computer of the Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) These brief steps will show us how to change the language on the display of the instrument panel and the onboard computer of the Mitsubishi Outlander…
Replacement of the front headlight bulb of the Mitsubishi Outlander
Replacement of the front headlight bulb of the Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) These brief instructions will show us how to disassemble and replace the headlight bulb of the Mitsubishi Outlander. First, we open the hood of the c…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos