Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Pajero
    4. : Transmission fluid

Mitsubishi Pajero - Transmission fluid

Transmission Fluid Mitsubishi Pajero (1999-2006 / mk 3, v 60)

Mitsubishi Pajero (1999-2006 / MK 3, V60)
How to Change the Gearbox Oil on a Mitsubishi Pajero?
To change the gearbox oil on a Mitsubishi Pajero, lift the car on a ramp to access the underside. Position a container under the gearbox and loosen the bolts …Read all…
Posted on 10 June 2026 by ScegliAuto
Mitsubishi Pajero (1999-2006 / MK 3, V60)
How to Change the Automatic Transmission Oil on Mitsubishi Pajero 4.5L
In this video, you will find instructions for replacing the transmission oil on a Mitsubishi Pajero 4.5L second series. First, lift the vehicle and remove the …Read all…
Posted on 13 May 2026 by ScegliAuto
Airbag (4) Alternator (1) Shocks (1) Antenna (1) Car stereo (4) Battery (3) Spark plugs (1) Glow plugs (1) Body (1) Key (4) Timing belt (3) Checks and maintenance (4) Dashboard (1) Brake rotors (1) Rear bench seat (1) Headlight (1) Tail light (1) Fog lights (1) Air filter (1) Cabin air filter (2) Fuel filter (1) Diesel fuel filter (2) Oil filter (1) Parking brake (1) Grille (1) Headlight bulb (6) Tail light bulb (3) Handle (1) Transmission fluid (2) Clock (1) Door trim panel (5) Brake pads (1) Pump (3) Fuel pump (2) Instrument cluster (1) Radiator (1) Heater core (3) Fuse box (19) Seat (4) Side mirror (1) (3) Service warning light (12) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos