Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Mitsubishi Pajero - Battery

Battery Mitsubishi Pajero (2006-2021 / v 80, mk 4)

Mitsubishi Pajero (2006-2021 / V80, MK 4)
How to solve the excessive battery drain issue from an Android radio
Many Android radios based on generic firmware default to a "sleep" mode instead of a complete shutdown. In this mode, the screen turns off and the unit appears …Read all…
Posted on 29 October 2026 by ScegliAuto
Mitsubishi Pajero (2006-2021 / V80, MK 4)
How to replace the battery in the Mitsubishi Pajero?
In this tutorial, we will see how to replace the battery in a Mitsubishi Pajero, a very simple and quick operation. First of all, let's make sure that the …Read all…
Posted on 18 December 2025 by ScegliAuto
Mitsubishi Pajero (2006-2021 / V80, MK 4)
How to Replace the Battery on a Mitsubishi Pajero
To replace the ignition battery on this model of vehicle, the following description provides all the information and instructions needed to carry out the …Read all…
Posted on 30 October 2026 by ScegliAuto
Mitsubishi Pajero (2006-2021 / V80, MK 4)
Battery Replacement on Mitsubishi Pajero
Lift the bonnet using the designated lever, then unscrew the two bolts securing the battery with a 12 mm socket. Unscrew the negative terminal, then similarly …Read all…
Posted on 5 May 2026 by ScegliAuto
Airbag (4) Alternator (1) Shocks (1) Antenna (1) Car stereo (4) Battery (4) Spark plugs (1) Glow plugs (1) Body (1) Key (4) Timing belt (3) Checks and maintenance (4) Dashboard (1) Brake rotors (1) Rear bench seat (1) Headlight (1) Tail light (1) Fog lights (1) Air filter (1) Cabin air filter (2) Fuel filter (1) Diesel fuel filter (2) Oil filter (1) Parking brake (1) Grille (1) Headlight bulb (6) Tail light bulb (3) Handle (1) Transmission fluid (2) Clock (1) Door trim panel (5) Brake pads (1) Pump (3) Fuel pump (2) Instrument cluster (1) Radiator (1) Heater core (3) Fuse box (19) Seat (4) Side mirror (1) Tire pressure warning light (3) Service warning light (13) Steering wheel (2)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos