Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Automatic Transmission Oil on Mitsubishi Pajero 4.5L

Model: Mitsubishi Pajero V60, MK 3 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Transmission fluid

See other generations:
Video tutorial

In this video, you will find instructions for replacing the transmission oil on a Mitsubishi Pajero 4.5L second series. First, lift the vehicle and remove the four screws from the lower engine protection; then, remove the fluid pipe, starting the vehicle for a minute to drain all excess fluid.

At this point, unscrew the bolt from the oil sump, draining it into a container; then unscrew the fastening screws of the sump itself for cleaning, replacing the gasket during reassembly. Finally, pour in the new oil (approximately 4.5 litres)!


Updated on 8 April 2026 by ScegliAuto


Related tutorials

How to Change the Gearbox Oil on a Mitsubishi Pajero?
How to Change the Gearbox Oil on a Mitsubishi Pajero?
Mitsubishi Pajero (1999-2006 / V60, MK 3) To change the gearbox oil on a Mitsubishi Pajero, lift the car on a ramp to access the underside. Position a container under the gearbox and loosen t…
Replace the 4x4 Traction Connector on the Mitsubishi Pajero 4
Replace the 4x4 Traction Connector on the Mitsubishi Pajero 4
Mitsubishi Pajero (2006-2021 / V80, MK 4) In this video tutorial, you will learn how to dismantle and replace the connector (the switch) that diverts the 4x4 traction from 4x2 by pressing the…
Fuse Box Diagram of a Mitsubishi Pajero
Fuse Box Diagram of a Mitsubishi Pajero
Mitsubishi Pajero (1991-1999 / MK 2, V20) This brief video tutorial shows the diagrams of the two fuse boxes located within a second generation Mitsubishi Pajero, produced from 1991 to 2000. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos