Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Pajero
    4. : Replace the transmission 4x4 drive connector on the Mitsubishi Pajero 4

Mitsubishi Pajero - Video tutorial

Model: Mitsubishi Pajero V80, MK 4 - Years 2006-2021
Operation: Replace the transmission 4x4 drive connector on the Mitsubishi Pajero 4

In this video tutorial we will see how to remove and replace the connector (the switch) that diverts the 4x4 drive from 4x2, by pressing the button, on the fourth series Mitsubishi Pajero. First we go to access the automatic transmission box, accessing the traction differential; then let's find the 4x4 traction switch, unscrewing the nut and disconnecting the electrical connector, as shown in the video. At this point we remove the component and replace it with the new one, screwing it onto the transmission casing; apply the reverse procedure for reassembly!


Posted on 5 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Pajero 1999-2006 - What problems on the Mitsubishi Pajero v60? Read Answer
    • Pajero 1999-2006 - How many kilometers does a Mitsubishi Pajero travel with a full tank? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos