Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Transmission Shaft Support on Mitsubishi L00

Model: Mitsubishi L 200 MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Differential

See other generations:
Video tutorial

If you hear a noise coming from the central part of the vehicle, it is likely that the support bearing of the transmission shaft is damaged. To replace it, you must disassemble the shaft itself.

Start by removing the fastening pins of the bearing support, then disconnect one end of the transmission shaft and slide it out along with the bearing. Place the shaft on a workbench, separate the universal joint, and then extract the front part of the bearing.

Now, continue with the removal of the old bearing, insert the new one, and reassemble the affected portion of the shaft.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Replace the Transmission Shaft Bearing on the Mitsubishi L 200?
How to Replace the Transmission Shaft Bearing on the Mitsubishi L 200?
Mitsubishi L 200 (1996-2005 / MK 1) To replace the transmission shaft bearing on the Mitsubishi L 200, access the underside of the vehicle where the shaft is located. It must be detache…
Guide to Replacing the Clutch on a Mitsubishi L200
Guide to Replacing the Clutch on a Mitsubishi L200
Mitsubishi L 200 (2005-2015 / MK 2) The instructions in this guide will allow you to remove and replace the clutch on a Mitsubishi L200. First, lift the vehicle and begin draining the e…
The timing marks for the timing belt on the Mitsubishi L200
The timing marks for the timing belt on the Mitsubishi L200
Mitsubishi L 200 (2005-2015 / MK 2) In this video, our YouTuber shows us where the various timing marks should be for perfect timing after installing the new timing belt on a Mitsubishi…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos