Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wheel Bearing on a Mitsubishi L 200

Model: Mitsubishi L 200 MK 2 - Years 2005-2015
Part: Bearing

You can replace the front wheel bearing on a Mitsubishi L 200 by lifting the vehicle using a jack or ramp, ensuring the wheel is not in contact with the ground. Once the car is lifted, loosen the bolts securing the wheel to the corresponding hub. The brake disc will now be accessible and must be completely removed by loosening its screws. At this point, you can use a puller to remove the bearing from the centre of the hub. Then, insert the new bearing and reassemble all components, checking their functionality.

Posted on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Wheel Bearing on the Mitsubishi L200?
How to Replace the Rear Wheel Bearing on the Mitsubishi L200?
Mitsubishi L 200 (1996-2005 / MK 1) This tutorial shows how to replace the rear wheel bearing on the Mitsubishi L200, a straightforward task that requires good manual skills. First, lif…
How to Replace the Transmission Shaft Bearing on the Mitsubishi L 200?
How to Replace the Transmission Shaft Bearing on the Mitsubishi L 200?
Mitsubishi L 200 (1996-2005 / MK 1) To replace the transmission shaft bearing on the Mitsubishi L 200, access the underside of the vehicle where the shaft is located. It must be detache…
How to Replace the Cabin Filter on a Mitsubishi L 200?
How to Replace the Cabin Filter on a Mitsubishi L 200?
Mitsubishi L 200 (2005-2015 / MK 2) To replace the cabin filter on a Mitsubishi L 200, open the glove compartment located on the passenger side. This will allow you to remove the securi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos