Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Spare Wheel from the Mitsubishi Triton - L200

Model: Mitsubishi L 200 MK 3 - Years 2015-2024
Part: Wheel

In this tutorial, you will learn how to remove and replace the wheel with the spare wheel of the Mitsubishi Triton and L200. First, move to the rear of the vehicle and lower the rear seats to access the appropriate extension tool; then, unscrew the spare wheel bolt as shown, allowing the wheel to drop from the frame, as illustrated in the video. At this point, perform the wheel replacement procedure with the spare wheel by raising the vehicle with the jack; finally, tighten the bolts in a cross pattern!

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you open the fuel tank cap on the Mitsubishi Triton L200?
How do you open the fuel tank cap on the Mitsubishi Triton L200?
Mitsubishi L 200 (2015-2024 / MK 3) .. Mitsubishi pickup presented in the video is the L200 Triton model, and this tutorial offers help to those who do not know how to open their fuel tank.. …
Removing the Centre Tunnel of Mitsubishi L200-Triton
Removing the Centre Tunnel of Mitsubishi L200-Triton
Mitsubishi L 200 (2005-2015 / MK 2) .. how to remove the centre tunnel of a Mitsubishi L200 or Triton, second series. First, get inside the car and remove the fixing screws found inside the.. …
Wheel Replacement on Mitsubishi L200 Triton
Wheel Replacement on Mitsubishi L200 Triton
Mitsubishi L 200 (2015-2024 / MK 3) Take the long lever from the toolkit and insert it fully into the hole located just above the rear number plate. Turning the lever counter-clockwise …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos