Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. L 200
    4. : How to change the wheels of the Mitsubishi L200

Mitsubishi L 200 - Video tutorial

Model: Mitsubishi L 200 MK 3 - Years 2015-2024
Part: Wheel
Operation: How to change the wheels of the Mitsubishi L200

We see below the instructions that will allow us to disassemble and replace the wheels of the Mitsubishi L 200, following these simple steps. First of all, let's get all the material needed to replace the wheel (the jack, the key and the spare wheel); then we remove the wheel from the floor, as shown in the video. At this point we loosen the wheel bolts and then lift the car with the jack; remove the wheel and replace it with the spare one, screwing and tightening the bolts crosswise. Finally we reposition the old wheel and the disassembly kit!


Posted on 23 May 2022 by ScegliAuto

    Frequently Asked Questions

    • L 200 2005-2015 - Where is the spare wheel located on the Mitsubishi L200? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos