Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. L 200
    4. : Wheel replacement on Mitsubishi L200 Triton

Mitsubishi L 200 - Video tutorial

Model: Mitsubishi L 200 MK 3 - Years 2015-2024
Part: Wheel
Operation: Wheel replacement on Mitsubishi L200 Triton

From the tools provided, take the long lever and insert it completely into the hole located just above the rear license plate. By turning the lever anticlockwise, you will operate a winch that makes the spare wheel come down from its housing; once on the ground, unhook the chain pin from the center hole of the wheel and pull it out. Take the supplied piston jack, place it under the frame in the direction of the wheel to be lifted and, before lifting the car, unscrew the bolts of the bursts wheel. Once unscrewed, raise the car, replace the wheel and lower again. Collect and place everything and you are done.


Posted on 14 November 2023 by ScegliAuto

    Frequently Asked Questions

    • L 200 2005-2015 - Where is the spare wheel located on the Mitsubishi L200? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos