Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the front brake pads on a Mitsubishi L 200?

Model: Mitsubishi L 200 MK 1 - Years 1996-2005
Part: Brake pads

To replace the front brake pads on a Mitsubishi L 200, lift the vehicle using a jack or ramp so that the corresponding wheel is off the ground. This will allow you to loosen the bolts securing the wheel to the hub, remove it, and access the components at the rear. You can then unscrew the bolts holding the brake caliper, detach it from the disc, and remove the pads inside. Now, insert the new pads into the caliper, reposition it, and secure it properly.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Mitsubishi L 200 (2005-2015 / MK 2) In this video tutorial, you will learn how to remove and replace the front brake pads on a Mitsubishi L200. First, lift the vehicle, even just on the…
Mitsubishi L 200 (2005-2015 / MK 2) To easily locate the fuse box on your Mitsubishi L 200 (2005-2015), follow the instructions in this guide. First, go inside the cabin and reach the d…
Mitsubishi L 200 (2005-2015 / MK 2) You can replace the front wheel bearing on a Mitsubishi L 200 by lifting the vehicle using a jack or ramp, ensuring the wheel is not in contact with …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos