Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Front Brake Pads on Mitsubishi L200

Model: Mitsubishi L 200 MK 2 - Years 2005-2015
Part: Brake pads

In this video tutorial, you will learn how to remove and replace the front brake pads on a Mitsubishi L200. First, lift the vehicle, even just on the front side, and remove the wheel; then, unscrew the bolts of the brake caliper located at the back to remove it. At this point, you can remove the old pads and replace them with the new ones of the correct type; before refitting, clean any carbon residue present on the disc and caliper. Finally, reassemble everything by following the reverse procedure!

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front brake pads on a Mitsubishi L 200?
How to replace the front brake pads on a Mitsubishi L 200?
Mitsubishi L 200 (1996-2005 / MK 1) To replace the front brake pads on a Mitsubishi L 200, lift the vehicle using a jack or ramp so that the corresponding wheel is off the ground. This …
When to Replace the Timing Belt on the Mitsubishi L200 2.5 TD?
When to Replace the Timing Belt on the Mitsubishi L200 2.5 TD?
Mitsubishi L 200 (2005-2015 / MK 2) In this brief guide, you will discover when to replace the timing belt on the Mitsubishi L200 2.5 Turbo Diesel, following the instructions below. The…
Where is the Fuse Box on the Mitsubishi L200?
Where is the Fuse Box on the Mitsubishi L200?
Mitsubishi L 200 (2015-2024 / MK 3) In this new mini guide dedicated to your Mitsubishi L200 Mk3 (2020-2023), we will discover where the fuse box is located and how to access the fuses …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos