Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Transmission Shaft Bearing on the Mitsubishi L 200?

Model: Mitsubishi L 200 MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Bearing

See other generations:
Video tutorial

To replace the transmission shaft bearing on the Mitsubishi L 200, access the underside of the vehicle where the shaft is located. It must be detached from the transmission case and the front axle by loosening the respective fixing bolts.

Once the shaft is removed from its housing, take off its joints to access the bearing, which should then be removed using a puller and replaced with a new spare part. After the replacement, reassemble all components.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

Replacement of Transmission Shaft Support on Mitsubishi L00
Replacement of Transmission Shaft Support on Mitsubishi L00
Mitsubishi L 200 (2005-2015 / MK 2) If you hear a noise coming from the central part of the vehicle, it is likely that the support bearing of the transmission shaft is damaged. To repla…
How to Replace the Front Wheel Bearing on a Mitsubishi L 200
How to Replace the Front Wheel Bearing on a Mitsubishi L 200
Mitsubishi L 200 (2005-2015 / MK 2) You can replace the front wheel bearing on a Mitsubishi L 200 by lifting the vehicle using a jack or ramp, ensuring the wheel is not in contact with …
How to Replace the Rear Wheel Bearing on the Mitsubishi L200?
How to Replace the Rear Wheel Bearing on the Mitsubishi L200?
Mitsubishi L 200 (1996-2005 / MK 1) This tutorial shows how to replace the rear wheel bearing on the Mitsubishi L200, a straightforward task that requires good manual skills. First, lif…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos