Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wheel Bearing on the Mitsubishi L200?

Model: Mitsubishi L 200 MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Bearing

See other generations:
Video tutorial

This tutorial shows how to replace the rear wheel bearing on the Mitsubishi L200, a straightforward task that requires good manual skills. First, lift the side you will be working on with a jack, taking all necessary safety precautions, then remove the wheel and take off the brake cover.

Next, remove the brake shoe, disconnect the cable, and separate the entire hub from the driveshaft. At this point, you have two options: replace the entire hub or just the bearing.

In the first case, simply fit the replacement part; in the second, as shown in the video, you will need to remove the bearing using a puller.


Updated on 1 July 2026 by ScegliAuto


Related tutorials

How to Remove the Spare Wheel from the Mitsubishi Triton - L200
How to Remove the Spare Wheel from the Mitsubishi Triton - L200
Mitsubishi L 200 (2015-2024 / MK 3) In this tutorial, you will learn how to remove and replace the wheel with the spare wheel of the Mitsubishi Triton and L200. First, move to the rear …
How to Change the Wheels of the Mitsubishi L200
Mitsubishi L 200 (2015-2024 / MK 3) Follow these instructions to remove and replace the wheels of the Mitsubishi L200 by following these simple steps. First, gather all the necessary ma…
How to Replace the Brake Disc on L200
How to Replace the Brake Disc on L200
Mitsubishi L 200 (2005-2015 / MK 2) Removing the brake disc from a Mitsubishi L200? Start by removing the front wheel. Lift the vehicle on a column lift to the desired height, then remo…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos