Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel filter of the Mitsubishi Pajero 3.0 V6

Model: Mitsubishi Pajero V60, MK 3 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Fuel filter

See other generations:
Video tutorial

The following steps will show us the process of disassembling and replacing the fuel filter of the Mitsubishi Pajero 3.0 V6. First, lift the vehicle and locate the fuel filter, located next to the driveshaft; then disconnect the fuel inlet and outlet pipes, thus removing the filter, as shown in the video.

At this point, install the new fuel filter cartridge, following the installation direction (usually indicated with arrows); replace the fuel pipes if they are in bad condition.


Posted on 15 April 2025 by ScegliAuto


Related tutorials

How to Remove the Fuel Tank Filter on a Mitsubishi Pajero
How to Remove the Fuel Tank Filter on a Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / V60, MK 3) This video shows how to remove the fuel tank filter on a Mitsubishi Pajero. Lift the boot lid and secure it, then remove the lower panel inside. Use …
Removing the Diesel Filter from a Mitsubishi Pajero
Removing the Diesel Filter from a Mitsubishi Pajero
Mitsubishi Pajero (1991-1999 / MK 2, V20) In this video tutorial, you will learn how to remove the diesel filter from a Mitsubishi Pajero. This operation is not very complicated but requires …
Where is the cabin filter located in the Mitsubishi Pajero?
Where is the cabin filter located in the Mitsubishi Pajero?
Mitsubishi Pajero (1999-2006 / V60, MK 3) After about two years of use, the cabin filter in the Mitsubishi Pajero 3 also needs replacing. In this video, you can see where it is located and ho…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos