Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the cabin filter located in the Mitsubishi Pajero?

Model: Mitsubishi Pajero V60, MK 3 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Cabin air filter

See other generations:
Video tutorial

After about two years of use, the cabin filter in the Mitsubishi Pajero 3 also needs replacing. In this video, you can see where it is located and how to replace it. Open the lower glove compartment on the passenger side, remove the pins that act as hinges, and then take out the drawer.

You will notice a rectangular cover; the filter is attached to it. Remove the two outer fixing screws and extract the filter from its housing. Insert the replacement, ensuring it is oriented correctly, as indicated on the filter itself.

Finally, reassemble everything by following the reverse procedure.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

Removing the Door Panel of a Mitsubishi Pajero
Removing the Door Panel of a Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / V60, MK 3) Remove the front left door panel on a Mitsubishi Pajero. Disconnect the battery terminals located in the engine bay. Using a screwdriver, remove the …
Where is the fuse box located on the Mitsubishi Pajero?
Where is the fuse box located on the Mitsubishi Pajero?
Mitsubishi Pajero (1991-1999 / MK 2, V20) The Mitsubishi Pajero II, produced from 1991 to 1999, has two fuse boxes: - The first fuse box is located in the engine compartment, near the battery…
Where is the Fuse Box on the Mitsubishi Pajero?
Where is the Fuse Box on the Mitsubishi Pajero?
Mitsubishi Pajero (1999-2006 / V60, MK 3) In this new guide, we will discover where the fuse box is located inside your Mitsubishi Pajero (1999-2006). First, completely turn off the vehicle a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos