Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel of a Mitsubishi Pajero

Model: Mitsubishi Pajero V60, MK 3 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Door trim panel

See other generations:
Video tutorial

Remove the front left door panel on a Mitsubishi Pajero. Disconnect the battery terminals located in the engine bay. Using a screwdriver, remove the frame of the upper door release lever and the screws on the handle (after removing the plastic cover).

Remove the window switch panel near the handle; unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel off by hand and detach it from the door (disconnect the power wiring and the opening cable).

Carry out the desired maintenance inside the door.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

Removing Door Panel on Mitsubishi Pajero
Removing Door Panel on Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / V60, MK 3) Removing the door panel on a Mitsubishi Pajero? Here’s how to remove it from the right door. Using a screwdriver, unscrew the screws located in the s…
How to Remove the Door Panel from a Mitsubishi Pajero
How to Remove the Door Panel from a Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / V60, MK 3) Want to service your Mitsubishi Pajero? Let's look at removing the door cover panel. Use a lever to remove the protective plastic around the internal…
How to Remove the Rear Tailgate Panel of the Mitsubishi Pajero - Montero
How to Remove the Rear Tailgate Panel of the Mitsubishi Pajero - Montero
Mitsubishi Pajero (2006-2021 / V80, MK 4) In this video tutorial, you will see the steps to remove and replace the plastic panel of the rear tailgate of the Mitsubishi Pajero and Montero. Fir…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos