Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Mitsubishi Pajero -

Mitsubishi Pajero (2006-2021 / mk 4, v 80)

Mitsubishi Pajero (2006-2021 / MK 4, V80)
How to Reset the Tyre Warning Light on the Mitsubishi Pajero?
An active warning light clearly indicates a potential issue, likely related to the tyres, which may be flat or punctured. In the latter case, it is advisable …Read all…
Posted on 2 July 2026 by ScegliAuto
Mitsubishi Pajero (2006-2021 / MK 4, V80)
How do you reset the tire pressure warning light on the Mitsubishi Pajero?
To reset the tire pressure warning light of the Mitsubishi Pajero, you need to inflate the tires until they reach the corresponding pressure value: this value …Read all…
Posted on 26 May 2025 by ScegliAuto
Mitsubishi Pajero (2006-2021 / MK 4, V80)
How do you reset the tire pressure light in the Mitsubishi Pajero?
Even the Mitsubishi Pajero has adapted, offering its owners the possibility to monitor tire pressure through electronic sensors installed in them. The …Read all…
Posted on 23 December 2024 by ScegliAuto
Airbag (4) Alternator (1) Shocks (1) Antenna (1) Car stereo (4) Battery (3) Spark plugs (1) Glow plugs (1) Body (1) Key (4) Timing belt (3) Checks and maintenance (4) Dashboard (1) Brake rotors (1) Rear bench seat (1) Headlight (1) Tail light (1) Fog lights (1) Air filter (1) Cabin air filter (2) Fuel filter (1) Diesel fuel filter (2) Oil filter (1) Parking brake (1) Grille (1) Headlight bulb (6) Tail light bulb (3) Handle (1) Transmission fluid (2) Clock (1) Door trim panel (5) Brake pads (1) Pump (3) Fuel pump (2) Instrument cluster (1) Radiator (1) Heater core (3) Fuse box (19) Seat (4) Side mirror (1) (3) Service warning light (12) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos