Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the timing chain of the Mitsubishi Canter?

Model: Mitsubishi Canter MK 8 - Years 2010-2024
Part: Timing belt

In order to replace the timing chain of the Mitsubishi Canter, you need to loosen the screws that secure the side panel of the engine block on the right side. Once you have access to the underlying components, you can loosen the screws that hold the tensioner and then remove the timing chain from its housing. Now you can insert the new replacement part so that it can be tensioned by inserting the tensioner and verifying that everything works correctly.

Posted on 10 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the alternator of the Mitsubishi Canter 3.0D
How to replace the alternator of the Mitsubishi Canter 3.0D
Mitsubishi Canter (2010-2024 / MK 8) Following the instructions in this guide, we will see how to disassemble and replace the alternator of the Mitsubishi Canter 3.0D. First, open the ho…
Resetting the Service Light on the Mitsubishi Canter
Resetting the Service Light on the Mitsubishi Canter
Mitsubishi Canter (2005-2010 / MK 7) When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenan…
How to Reset the Oil Warning Light on a Mitsubishi Fuso/Canter
How to Reset the Oil Warning Light on a Mitsubishi Fuso/Canter
Mitsubishi Canter (2010-2024 / MK 8) To reset the service light on the Mitsubishi Fuso/Canter, turn on the ignition and simultaneously press the two buttons located on either side of the…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos