|
Do it yourself
| |||
| ||||
How to restore the service light on the 2018 Mitsubishi Outlander
Model: Mitsubishi Outlander
MK 3
- Years 2013-2021
In this short video, we are shown the procedure to reset the maintenance light of the 2018 Mitsubishi Outlander. It is recommended to perform this procedure only after servicing the vehicle. To reset it, start the instrument panel and then turn it off. Now, press the menu button on the left side of the steering wheel and navigate through the menu until you find the maintenance option, represented by a wrench icon. Once found, press and hold the button for a few seconds until the light starts flashing. When the light starts flashing, release the button and press it again to confirm the reset. After resetting, restart the instrument panel to verify that the procedure was successful.
Posted on 6 October 2024 by ScegliAuto
Video tutorial
Related tutorials
Mitsubishi Outlander
(2013-2021 /
MK 3)
The service light on the Mitsubishi Outlander MK3 (produced between 2013 and 2020) can be reset very easily using a single button. Once the ignition …
Mitsubishi Outlander
(2013-2021 /
MK 3)
In this article, we will see how to reset the maintenance light on the Mitsubishi Outlander produced from 2013 to 2021. To reset this light, you will…
Mitsubishi Outlander
(2007-2012 /
MK 2)
If you want to find out how to correctly perform a manual reset of the maintenance light on your 2010 Mitsubishi Outlander, all you have to do is fol…
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.102
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
