Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the tire pressure light on the Mitsubishi Outlander?

Model: Mitsubishi Outlander MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Tire pressure warning light

See other generations:
Video tutorial

The procedure for resetting the tire pressure warning light on the instrument panel of the Mitsubishi Outlander involves first inflating the tires, bringing them to the correct inflation pressure value: this value is indicated on the sticker attached to the driver's door pillar.

Once these tires have been inflated, it will be possible to turn on the instrument panel and wait for the warning light to turn off; if it does not turn off, it may be necessary to connect a diagnostic tool to the vehicle's OBD port.

The latter is located at the bottom left of the steering column.


Posted on 1 February 2025 by ScegliAuto


Related tutorials

Mitsubishi Outlander (2013-2021 / MK 3) This guide provides instructions on how to reset and recalibrate the tyre pressure sensors on the Mitsubishi Outlander. Before resetting the TPMS lig…
Mitsubishi Outlander (2021-2026 / MK 4) The instructions in this guide will allow us to reset the tire pressure warning light on the Mitsubishi Outlander; before resetting the TPMS sensors,…
Mitsubishi Outlander (2013-2021 / MK 3) To reset the tyre pressure light on a Mitsubishi Outlander, inflate the tyres until they reach the correct pressure value. Once the tyres are properl…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos