Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Tyre Pressure Reference Label on a Mitsubishi Outlander III

Model: Mitsubishi Outlander MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Checks and maintenance

See other generations:
Video tutorial

Let's see where to find the label with the tyre pressure reference values on a Mitsubishi Outlander III: on the driver's door pillar, near the hinge, you will find a sticker indicating the sizes of the tyres fitted as standard on the vehicle (the same size, and any alternative sizes, are listed in section 3 of the vehicle registration document) along with the wheel size (expressed in inches).

The recommended cold pressure is indicated in BAR (the unit of measurement used in the EU) and in PSI (the unit of measurement used in Anglo-Saxon countries), and it specifies the normal load pressure (front and rear) and the maximum load at full capacity.


Posted on 3 May 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on the Mitsubishi Outlander
How to Reset the Tyre Pressure Warning Light on the Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) This guide provides instructions on how to reset and recalibrate the tyre pressure sensors on the Mitsubishi Outlander. Before resetting the TPMS lig…
How to measure the tire pressure of the Mitsubishi Outlander
How to measure the tire pressure of the Mitsubishi Outlander
Mitsubishi Outlander (2021-2026 / MK 4) To measure the tire pressure of our Mitsubishi Outlander, it is best to follow the recommendations of the YouTuber, who rightly takes the measurement…
Where to find the tire pressure indication on our Mitsubishi Outlander
Where to find the tire pressure indication on our Mitsubishi Outlander
Mitsubishi Outlander (2021-2026 / MK 4) Let's see where to find the tire pressure indication on the Mitsubishi Outlander: the label with the recommended pressure values from the Manufacture…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos