Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. : I : How to remove the headlight of the Mitsubishi I

Mitsubishi I - Video tutorial

Model: Mitsubishi I MK 1 - Years 2006-2013
Part: Headlight
Operation: How to remove the headlight of the Mitsubishi I

Let's see in this guide how to disassemble and replace the front light assembly of the Mitsubishi I, following these simple steps. First of all, let's move to the front of our car and start by removing the plastic cap that we find on the bulkhead, above the front light; then we go to unscrew the screw that we find inside, as shown in the video. At this point we are going to gently unhook the bumper on the sides, thus unscrewing the screws of the headlight; we disconnect the electrical connector of the bulbs to remove the optical group, following the video to the end!


Posted on 13 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos