Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Mitsubishi L200

Model: Mitsubishi L 200 MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

See other generations:
Video tutorial

The following procedure will allow you to reset the service light for the routine maintenance of the engine oil change on the Mitsubishi L200. First, get in the vehicle and turn on the instrument panel; then press the button until you reach the maintenance key option, holding the button for about ten seconds to initialise the service reset (until the light stops flashing), as shown in the video.

To conclude, turn off the ignition and start the engine!


Updated on 6 October 2026 by ScegliAuto


Related tutorials

How to reset the Service light on a Mitsubishi L200?
How to reset the Service light on a Mitsubishi L200?
Mitsubishi L 200 (2015-2024 / MK 3) To reset the Service light on a Mitsubishi L200, connect a diagnostic tool to the vehicle's OBD port: this is located on the dashboard immediately be…
How to restore the service light indicator of the Mitsubishi L200
How to restore the service light indicator of the Mitsubishi L200
Mitsubishi L 200 (2015-2024 / MK 3) In today's article, we will see how to reset the service light of the Mitsubishi L200, this operation will be necessary after having performed the se…
How to reset the Service light on the Mitsubishi L200?
How to reset the Service light on the Mitsubishi L200?
Mitsubishi L 200 (2015-2024 / MK 3) To reset the Service light on the Mitsubishi L200, turn on the ignition by rotating the key in the ignition barrel. Once the ignition is on, press th…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos