Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on a Moto Guzzi V7 Special

Model: Moto Guzzi V7 Special
Part: Exhaust muffler

Video tutorial

To replace the exhaust on a Moto Guzzi V7 Special, loosen the screws that secure the exhaust terminal to its housing, located near the rear wheel on the right side of the bike. Once the screws are loosened, you can widen the connecting clamp between the exhaust terminal and the collector.

At this point, insert the new one, ensuring it is connected and secured properly. Then, start the engine to verify that everything is functioning correctly.


Posted on 4 November 2026 by ScegliAuto


Related tutorials

How to replace the handlebars on the Moto Guzzi V7 Special
How to replace the handlebars on the Moto Guzzi V7 Special
V7 Special Today’s main instructions will illustrate the procedure for removing and replacing the handlebars on the Moto Guzzi V7 Special. First, place the bike…
How to Replace the Seat Rail on the Moto Guzzi V7 Special
How to Replace the Seat Rail on the Moto Guzzi V7 Special
V7 Special This guide provides instructions for removing and replacing the seat rail on the Moto Guzzi V7 Special. First, place your motorcycle on a stand and b…
How to Replace the Levers on the Moto Guzzi V7 Special?
How to Replace the Levers on the Moto Guzzi V7 Special?
V7 Special To replace the levers on the Moto Guzzi V7 Special, loosen the nut that secures the clutch lever to its housing, allowing the corresponding pin to be…

Battery Replacement and USB Socket Installation on Kawasaki ZX10

If the battery of the Kawasaki ZX10R is flat and cannot hold subsequent charging attempts, you need to replace it. To do this, open the passenger seat section with its key and remove it. Unscrew the four screws holding the frame around the seat. You can then unscrew the bolts that secure the rider's seat and access the battery compartment. Disconnect the elastic strap holding it in place and remove the terminals, starting with the negative. Take out the old battery and place a new one in its position, securing it with the elastic strap. Take this opportunity to install a USB socket, useful as an additional power outlet. The installation is straightforward: connect the two wires to the battery terminals with the respective screws, ensuring the correct polarity, and position the socket under the passenger seat for easy access. Refit the seats and the frame by reversing the steps.

Watch the video!


by ScegliAuto

More videos