Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Xmax 300
Part: Clock

On the Yamaha Xmax 300, the clock adjustment is done by turning on the instrument panel, inserting the appropriate key into the ignition switch: once the instrument panel is turned on, you can press and hold the button located on the right side of the handlebars, just below the red button. This way you will notice that the hours will start flashing, and can be changed by pressing the same button repeatedly; after a few seconds you will notice that the minutes will also start flashing, which can be changed in the same way.

Posted on 14 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Xmax 300 Let's see the procedure on how to set the clock on the display of the instrument panel of the Yamaha Xmax 300 scooter. First, put the scooter on the …
Xmax 300 On the instrument panel of the Yamaha Xmax 300, the clock adjustment can be done by turning on the instrument panel and rotating the key inside the i…
Xmax 300 The following steps will allow us to set the clock on the display of the instrument panel of the Yamaha Xmax 300 scooter. First, turn on the instrume…

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos