Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Seat Rail on the Moto Guzzi V7 Special

Model: Moto Guzzi V7 Special

Video tutorial

This guide provides instructions for removing and replacing the seat rail on the Moto Guzzi V7 Special. First, place your motorcycle on a stand and begin by removing the rider's seat and the passenger seat; then, unscrew the fixing screws of the seat rail to remove it, as shown in the video.

At this point, install the new seat rail or rear rack, securing everything with the appropriate bolts; then refit the seat, following the video tutorial to the end!


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the Moto Guzzi V7 Special?
How to Change the Engine Oil of the Moto Guzzi V7 Special?
V7 Special To change the engine oil of the Moto Guzzi V7 Special, unscrew the oil drain plug located at the front bottom of the bike. Once the plug is removed, …
How to replace the engine oil and oil filter of the Moto Guzzi V7 Special 850
How to replace the engine oil and oil filter of the Moto Guzzi V7 Special 850
V7 Special In this short guide, we will see how to perform the routine maintenance service by replacing the engine oil and oil filter of the Moto Guzzi V7 Speci…
How to Remove the Front Headlamp of the Moto Guzzi V7 Special?
How to Remove the Front Headlamp of the Moto Guzzi V7 Special?
V7 Special To remove the front headlamp of the Moto Guzzi V7 Special, loosen the screws that secure it to the housing: these are located at the bottom of the ch…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos