Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this short guide, we will see how to perform the routine maintenance service by replacing the engine oil and oil filter of the Moto Guzzi V7 Special 850. First, we place the motorcycle on the stand and start unscrewing the oil drain bolt found on the oil pan, allowing the oil to drain into a container for about ten minutes. After that, we unscrew the screws of the oil filter cover, replacing the cartridge with a new one, as shown in the video. At this point, we unscrew the fill screw and top up with the new engine oil, filling it to the maximum level.

Posted on 9 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Replace the Engine Oil and Oil Filter of the Moto Guzzi V7 Special
Replace the Engine Oil and Oil Filter of the Moto Guzzi V7 Special
V7 Special Follow the main instructions below to carry out the routine maintenance service by replacing the engine oil and oil filter of the Moto Guzzi V7 Speci…
How to Change the Engine Oil of the Moto Guzzi V7 Special?
How to Change the Engine Oil of the Moto Guzzi V7 Special?
V7 Special To change the engine oil of the Moto Guzzi V7 Special, unscrew the oil drain plug located at the front bottom of the bike. Once the plug is removed, …
How to Replace the Seat Rail on the Moto Guzzi V7 Special
How to Replace the Seat Rail on the Moto Guzzi V7 Special
V7 Special This guide provides instructions for removing and replacing the seat rail on the Moto Guzzi V7 Special. First, place your motorcycle on a stand and b…

How to Replace and Install the Front Wheel on a Beta RR 300

Today, we will go through the instructions to install or replace the front wheel on the Beta RR 300 enduro bike by following these simple steps. First, place your bike on a stand and lift the front wheel off the ground. Next, unscrew the fixing bolts of the front brake caliper to remove it. At this point, unscrew the central axle of the wheel, removing and possibly replacing the tyre. Then, tighten the fork nuts and reassemble everything by reversing the disassembly procedure!

Watch the video!


by ScegliAuto

More videos