Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Follow the main instructions below to carry out the routine maintenance service by replacing the engine oil and oil filter of the Moto Guzzi V7 Special. First, place the central stand on your bike and start to unscrew the oil drain bolt located under the engine, using a socket spanner, allowing it to drain into a container for about ten minutes; then unscrew and remove the oil filter cartridge, which is also found on the sump, replacing the filter with a new one. Finally, pour in the new engine oil of the correct type!

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the Moto Guzzi V7 Special?
How to Change the Engine Oil of the Moto Guzzi V7 Special?
V7 Special To change the engine oil of the Moto Guzzi V7 Special, unscrew the oil drain plug located at the front bottom of the bike. Once the plug is removed, …
How to replace the engine oil and oil filter of the Moto Guzzi V7 Special 850
How to replace the engine oil and oil filter of the Moto Guzzi V7 Special 850
V7 Special In this short guide, we will see how to perform the routine maintenance service by replacing the engine oil and oil filter of the Moto Guzzi V7 Speci…
How do you remove the front headlight of the Moto Guzzi V7 Special?
How do you remove the front headlight of the Moto Guzzi V7 Special?
V7 Special In order to remove the front headlight of the Moto Guzzi V7 Special, you need to loosen the screws that attach it to the housing: these are located a…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos