Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Moto Guzzi Stelvio
Part: Valve

To adjust the valves on the Moto Guzzi Stelvio, you need to open the box marked "Quattro valvole" by removing the fastenings. To adjust the valves, check their correct adjustment values in the vehicle's user and maintenance manual: to apply them, a feeler gauge will be necessary. This should be inserted into the valve, which will need to be tightened or loosened as required. Once all four valves have been correctly adjusted, you can reattach the box and secure it with the removed bolts.

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Alternator Belt on the Moto Guzzi Stelvio?
How to Replace the Alternator Belt on the Moto Guzzi Stelvio?
Stelvio To replace the alternator belt on the Moto Guzzi Stelvio, you need to loosen the plastic protection panel located on the left side of the bike. Once …
How to Replace the Rear Shock Absorber on a Moto Guzzi Stelvio
How to Replace the Rear Shock Absorber on a Moto Guzzi Stelvio
Stelvio To replace the rear shock absorber on a Moto Guzzi Stelvio, loosen the bolts securing it within its housing at the rear of the bike. The part will be…
How do you replace the motor oil of the Moto Guzzi Stelvio?
How do you replace the motor oil of the Moto Guzzi Stelvio?
Stelvio To replace the motor oil of the Moto Guzzi Stelvio, you need to loosen the drain plug located at the bottom of the oil pan: once this is removed, you…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos