Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Air Filter on the Moto Guzzi Norge

Model: Moto Guzzi Norge
Part: Air filter

Video tutorial

This guide shows you how to remove and replace the air filter on the Moto Guzzi Norge, following the instructions below. First, place the motorcycle on the stand and begin to remove the rider's seat; then unscrew the fixing screw of the air filter clamp to remove it. At this point, install the new original air filter, tightening the clamp screw securely on the engine intake; finally, reassemble the previously removed components, securing the rider's seat and then starting the engine!


Updated on 3 September 2026 by ScegliAuto


Related tutorials

How to Remove the Air Filter Box on a Moto Guzzi Norge
How to Remove the Air Filter Box on a Moto Guzzi Norge
Norge In this brief and simple guide, you will find the main instructions to remove and replace the air filter and air filter box on a Moto Guzzi Norge. Fi…
How to Replace the Air Filter on Moto Guzzi Norge
How to Replace the Air Filter on Moto Guzzi Norge
Norge To replace the air filter on the Moto Guzzi Norge, first loosen the screws securing the fuel tank at the front of the bike, disconnecting the connect…
How to Change the Engine Oil of the Moto Guzzi Norge
How to Change the Engine Oil of the Moto Guzzi Norge
Norge To change the engine oil of the Moto Guzzi Norge, loosen the drain plug located at the central lower part of the bike: once this plug is loosened, yo…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos