Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The procedure for replacing the exhaust on the MV Agusta Brutale 800 involves loosening the screws that secure the exhaust terminal to its housing, located on the right side of the bike just before the rear wheel: once the exhaust fastening screws have been loosened, it will be possible to proceed by widening the ring that connects the exhaust to the exhaust manifold and then it will be possible to completely remove the old exhaust. The new exhaust terminal can then be inserted into its seat, making sure everything is functioning properly.

Posted on 25 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on the MV Agusta Brutale 800?
How to Replace the Exhaust on the MV Agusta Brutale 800?
Brutale 800 To replace the exhaust on the MV Agusta Brutale 800, remove the plastic cover located on the right side of the bike, just before the exhaust. Under t…
How to Replace the Exhaust on a MV Agusta Brutale 800
How to Replace the Exhaust on a MV Agusta Brutale 800
Brutale 800 To replace the exhaust on the MV Agusta Brutale 800, you need to remove the plastic cover located on the right side of the bike, just before the exha…
How do you replace the exhaust pipe of the MV Agusta Brutale 800?
How do you replace the exhaust pipe of the MV Agusta Brutale 800?
Brutale 800 The exhaust of the MV Agusta Brutale 800 can be replaced by removing the plastic panel located on the right side of the motorcycle, in the area immed…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos