Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
It will be possible to perform the replacement of the motor oil located inside the MV Agusta Brutale 800RR system by loosening the drain plug of the oil pan, which will be located in the lower central part of the vehicle: once the plug has been unscrewed, it will be possible to collect the oil inside a properly positioned container. It will be necessary to drain all the used oil and finally it will be possible to close the tank again with the respective drain plug. At this point, the oil filter, located in the same position, can also be removed; it will be necessary to replace it with a new spare part, checking the engine operation.

Posted on 13 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you change the engine oil of the MV Agusta Brutale 800RR?
How do you change the engine oil of the MV Agusta Brutale 800RR?
Brutale 800 The oil change for the MV Agusta Brutale 800RR can be performed by completely unscrewing the drain plug of the oil pan, which will be located in the …
How to Replace the Air Filter on the MV Agusta Brutale 800RR?
How to Replace the Air Filter on the MV Agusta Brutale 800RR?
Brutale 800 To replace the air filter on the MV Agusta Brutale 800RR, loosen the screws securing the seat to its housing so that it can be removed. Once the seat…
How do you replace the air filter of the MV Agusta Brutale 800RR?
How do you replace the air filter of the MV Agusta Brutale 800RR?
Brutale 800 The air filter replacement on the MV Agusta Brutale 800RR is done by loosening the screws that secure the motorcycle seat to its housing, so that the…

How to Reset the Service Light on the Yamaha Xmax 250?

To reset the service light on the Yamaha Xmax 250, you need to insert the ignition key into the appropriate slot, so that you can turn it and switch on the instrument panel. Once this is done, press and hold the central button located on the left side of the instrument panel: the button should be held for about 20 seconds. When released, you will notice that the flashing service light has turned off: to verify that the reset has occurred correctly, you will need to switch off and then switch on the vehicle's instrument panel.

Watch the video!


by ScegliAuto

More videos