Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the fuel tank of the MV Agusta F3 675

Model: Mvagusta F3 675
Part:

Video tutorial

Today's video will show us the steps to disassemble and remove the fuel tank of the MV Agusta F3 675 motorcycle, as well as the F3 800. First, we put the motorcycle on the stand and start by removing the driver's seat; then we unscrew all the fixing screws we find on the sides, removing the steering damper if present, as shown in the video.

At this point, we gently lift the tank and disconnect all the lines, as well as the fuel line and the electrical connector; we reassemble the tank by applying the reverse process!


Posted on 13 June 2025 by ScegliAuto


Related tutorials

How to remove and replace the fairings on the MV Agusta F3 675
How to remove and replace the fairings on the MV Agusta F3 675
F3 675 In this video tutorial, you will learn how to remove and replace the side plastic fairings of the MV Agusta F3 675, as well as the 800 model. First, …
How do you replace the battery of the MV Agusta F3 675?
How do you replace the battery of the MV Agusta F3 675?
F3 675 In order to replace the battery of the MV Agusta F3 675, you will need to loosen the screws that secure the panel located on the left side of the bik…
How to Adjust the Chain on the MV Agusta F3 675
How to Adjust the Chain on the MV Agusta F3 675
F3 675 This guide will show you how to adjust the drive chain on the MV Agusta F3 675 motorcycle, as well as the F3 800. First, place the motorcycle on a st…

How to Change the Engine Oil in a Yamaha XMAX 250 Scooter

In this tutorial, you will see how to change the engine oil in a Yamaha XMAX 250 scooter, a very simple and quick operation to perform every 12 months. First, ensure the engine is cool enough, then place a container underneath it. Locate the drain bolt on the left side and, using a socket wrench, unscrew it completely. Allow all the oil in the system to drain out, then open the filter housing and proceed with its replacement. At this point, reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos