Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Below are the instructions on how to remove and replace the air filter of the engine on the MV Agusta Brutale 800 motorcycle. First, place the motorcycle on a stand and start by removing the fuel tank to access the screws of the air filter box cover in order to remove it; extract the air filter cartridge from the side, as shown in the video. At this point, install the new original air filter, inserting it in the correct orientation; then refit the air filter box cover and the fuel tank.

Posted on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Coolant Reservoir on an MV Agusta Brutale 800
How to Replace the Coolant Reservoir on an MV Agusta Brutale 800
Brutale 800 This guide explains how to disassemble and replace the coolant reservoir on an MV Agusta Brutale 800. First, place your bike on a stand and begin by …
How to Perform a Maintenance Service on the MV Agusta Brutale 800
How to Perform a Maintenance Service on the MV Agusta Brutale 800
Brutale 800 This guide provides instructions for performing a maintenance service on the MV Agusta Brutale 800, including replacing the air filter, spark plugs, …
How to Change the Engine Oil and Oil Filter on a MV Agusta Brutale 800 RR
How to Change the Engine Oil and Oil Filter on a MV Agusta Brutale 800 RR
Brutale 800 Today, let's explore the step-by-step instructions that will allow you to perform the routine maintenance service by changing the engine oil and oil …

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos