Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To check the oil level, your Brutale must be perfectly upright, and looking through the appropriate sight glass, the lubricant should be between the two marks. The coolant sight glass is located on the opposite side, indicated by a label: check this as well (it should be just above the minimum). Check if the battery is charged by starting the bike. If it is flat, remove the passenger seat and the rider's seat (using the appropriate hook). Check for loose terminals or signs of corrosion. Typically, the battery lasts 3-4 years. Finally, check the tyre pressure.

Updated on 30 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Performing a Service on MV Agusta Brutale R910
Performing a Service on MV Agusta Brutale R910
Brutale R910 In this video, we’ll go through all the steps needed to perform a routine maintenance service on an MV Agusta Brutale R910 motorcycle. First, remove …
How do you replace the exhaust on the MV Agusta Brutale R910?
How do you replace the exhaust on the MV Agusta Brutale R910?
Brutale R910 To replace the exhaust on the MV Agusta Brutale R910, you need to loosen the screws that secure it to its housing on the right side of the bike, near…
How to Remove the Rear Wheel of the MV Agusta Brutale R910
How to Remove the Rear Wheel of the MV Agusta Brutale R910
Brutale R910 This guide provides the main instructions for removing and replacing the rear wheel or tyre of the MV Agusta Brutale R910 motorcycle, as well as the …

How to Replace the Headlight Bulbs on the KTM RC 200?

As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat.

Watch the video!


by ScegliAuto

More videos