Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Mvagusta
    3. :
  3. F3 800
    4. : How to replace the brake and clutch levers on Mv Agusta F3

Model: Mvagusta F3 800
Part:
How to replace the brake and clutch levers on Mv Agusta F3

In this video tutorial we will see how to remove and replace the brake and clutch levers on an Mv Agusta F3, in simple steps. First we are going to remove the clutch lever; to do this we are going to unscrew the two fixing bolts and then unscrew the screw of the lever itself, as shown in the video. At this point we disconnect the clutch cable from the lever; then insert the new one, screwing the screw and tightening the two bolts. For the brake lever we carry out the same operation, unscrewing the screw of the central pin and replacing it with the new one, of the right type!


Posted on 22 January 2024 by ScegliAuto

How do you replace the air filter on the Harley Davidson Dyna?

The procedure for replacing the air filter on the Harley Davidson Dyna involves loosening the screws that secure the cover located on the right side of the motorcycle, just below the fuel tank. Once the cover has been removed, the underlying filter can be located: it must be removed from its seat by loosening the fixing screws and pulling it out from inside its housing. After the old filter has been removed, the new replacement piece can be installed, securing it in place with the screws and reinstalling the removed cover.

Watch the video!


by ScegliAuto

More videos