Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Fairings on Mv Agusta F3

Model: Mvagusta F3 675
Part:

Video tutorial

In this straightforward tutorial, particularly in this video, you will see the sequence for removing the fairings. Start by getting underneath the bike and undoing the two bolts present here.

Undo the other three bolts related to the lower fairing, located on the right side of the bike. Remove this protection and proceed to the right front side fairing, undoing all the screws clearly shown in the video.

Now return to undo the screws of the lower fairing on the other side of the bike. At this point, repeat the operation for the front side fairing.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

How to remove and replace the fairings on the MV Agusta F3 675
How to remove and replace the fairings on the MV Agusta F3 675
F3 675 In this video tutorial, you will learn how to remove and replace the side plastic fairings of the MV Agusta F3 675, as well as the 800 model. First, …
How to Perform Maintenance Service on an MV Agusta F3
How to Perform Maintenance Service on an MV Agusta F3
F3 675 In this guide, you will find instructions to replace the engine oil and oil filter, performing the regular maintenance service on an MV Agusta F3 675…
How to Remove the Exhaust Gas Sensor on Mv Agusta F3 675 - 800
How to Remove the Exhaust Gas Sensor on Mv Agusta F3 675 - 800
F3 675 In today's tutorial, you will learn how to remove the exhaust gas sensor on the Mv Agusta F3 675, as well as the 800, by following the instructions b…

How to Change the Engine Oil in a Yamaha XMAX 250 Scooter

In this tutorial, you will see how to change the engine oil in a Yamaha XMAX 250 scooter, a very simple and quick operation to perform every 12 months. First, ensure the engine is cool enough, then place a container underneath it. Locate the drain bolt on the left side and, using a socket wrench, unscrew it completely. Allow all the oil in the system to drain out, then open the filter housing and proceed with its replacement. At this point, reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos