Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the exhaust on the MV Agusta Brutale 800, loosen the bolts securing it to the end of the exhaust pipe on the right side of the bike. Once the bolts are loosened, you can detach the clamp and completely remove the old exhaust, which can then be replaced with a new one. The new exhaust must be secured to the exhaust pipe using the appropriate clamp; afterwards, fix it to the respective supports by re-tightening the bolts that were previously removed.

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the MV Agusta Brutale 800?
How do you replace the exhaust pipe of the MV Agusta Brutale 800?
Brutale 800 The exhaust of the MV Agusta Brutale 800 can be replaced by removing the plastic panel located on the right side of the motorcycle, in the area immed…
How do you replace the exhaust pipe of the MV Agusta Brutale 800?
How do you replace the exhaust pipe of the MV Agusta Brutale 800?
Brutale 800 The operation of replacing the exhaust on the MV Agusta Brutale 800 involves removing the plastic panel located on the right side of the motorcycle, …
How do you replace the exhaust pipe of the MV Agusta Brutale 800 RR?
How do you replace the exhaust pipe of the MV Agusta Brutale 800 RR?
Brutale 800 To replace the exhaust of the MV Agusta Brutale 800 RR, you need to loosen the screws that fix the exhaust terminal to its housing, on the right side…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos