Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Wheel Hub on a MV Agusta Brutale 1078 RR

Model: Mvagusta Brutale 1078 Rr
Part: Bearing

Video tutorial

In this video tutorial, you will learn how to remove and replace the rear wheel hub bearing on the MV Agusta Brutale 1078 RR motorcycle. First, remove the rear wheel from your bike, then take out the entire rear axle.

Next, undo the central nut of the wheel hub and remove the drive sprocket, as shown in the video. At this point, unscrew the joint screws to access the drive shaft; now replace the bearings with new ones, ensuring everything is properly lubricated, and follow the video tutorial to the end!


Updated on 17 June 2026 by ScegliAuto


Related tutorials

Dismantling the Instrument Cluster of the Mv Agusta Brutale 1078 RR
Dismantling the Instrument Cluster of the Mv Agusta Brutale 1078 RR
Brutale 1078 Rr In this video tutorial, follow the instructions to dismantle the components of the instrument cluster of the Mv Agusta Brutale 1078 RR in simple step…
How to replace the front headlight of the MV Agusta Brutale 1078 RR
How to replace the front headlight of the MV Agusta Brutale 1078 RR
Brutale 1078 Rr In this guide we will see the main steps to disassemble and replace the front headlight of the MV Agusta Brutale 1078 RR motorcycle. First, we put th…
Dismantling the front forks of the MV Agusta Brutale 1078 RR
Dismantling the front forks of the MV Agusta Brutale 1078 RR
Brutale 1078 Rr In this video tutorial, you will learn how to dismantle and service the front forks of the MV Agusta Brutale 1078 RR, following the instructions prov…

How to Change the Engine Oil in a Yamaha XMAX 250 Scooter

In this tutorial, you will see how to change the engine oil in a Yamaha XMAX 250 scooter, a very simple and quick operation to perform every 12 months. First, ensure the engine is cool enough, then place a container underneath it. Locate the drain bolt on the left side and, using a socket wrench, unscrew it completely. Allow all the oil in the system to drain out, then open the filter housing and proceed with its replacement. At this point, reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos