Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial, you will learn how to dismantle and service the front forks of the MV Agusta Brutale 1078 RR, following the instructions provided below. First, remove the front forks from your motorcycle; then, unscrew the fork adjustment screw to access the interior, removing the stanchion and spring as shown in the video. At this point, replace the oil seal and hydraulic component, performing a complete service; then reassemble the front forks, following the video tutorial to the end!

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Tyres on the MV Agusta Brutale 1078 RR?
Brutale 1078 Rr To replace the tyres on the MV Agusta Brutale 1078 RR, you need to unscrew the nuts that secure the central axle of both wheels. Once these nuts are …
How to replace the front headlight of the MV Agusta Brutale 1078 RR
How to replace the front headlight of the MV Agusta Brutale 1078 RR
Brutale 1078 Rr In this guide we will see the main steps to disassemble and replace the front headlight of the MV Agusta Brutale 1078 RR motorcycle. First, we put th…
How to Remove and Replace the Air Intakes of the MV Agusta Brutale 1078 RR
How to Remove and Replace the Air Intakes of the MV Agusta Brutale 1078 RR
Brutale 1078 Rr Today, in this video tutorial, learn how to remove and replace the air intakes, which are the air ducts to the engine air filter, of the MV Agusta Br…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos