Do it yourself
Frequently asked questions about cars and motorcycles
To replace the fuel tank on a MV Agusta Brutale 1090RR, first remove the motorcycle seat to access the screw that secures the tank at its front, previously covered by the seat. Next, detach the side panels from the tank by loosening all the underlying screws: this will allow the old tank to be lifted and the underlying connectors to be disconnected. At this point, you can completely remove the old tank to insert the new one.

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Brutale 1090rr You can replace the rear view mirror on the MV Agusta Brutale 1090RR by loosening the screws that secure it to its housing on the side of the handleb…
Brutale 1090rr The steps illustrated in this guide will show us how to bleed and top up the brake fluid or oil of the MV Agusta Brutale 1090RR motorcycle. First, we…
Brutale 1090rr To remove the fuel tank from the MV Agusta Brutale 1090RR, you need to detach the side panels located directly under the tank. Once these panels are …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos