Do it yourself
Frequently asked questions about cars and motorcycles
The steps illustrated in this guide will show us how to bleed and top up the brake fluid or oil of the MV Agusta Brutale 1090RR motorcycle. First, we put our motorcycle on the stand and start by removing the rider's seat; we unscrew the screws of the brake fluid reservoir cover, as shown in the video. At this point, we bleed the brake caliper, opening the valve and letting the fluid come out by pressing the rear brake lever; then we finally top up with the new brake oil, following the video tutorial until the end!

Posted on 14 August 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

Brutale 1090rr To replace the fuel tank on a MV Agusta Brutale 1090RR, first remove the motorcycle seat to access the screw that secures the tank at its front, prev…
Brutale 1090rr The following steps will show us how to install the front wheel of the Mv Agusta Brutale 1090RR motorcycle, following the instructions below. First, …
Brutale 1090rr You can replace the rear view mirror on the MV Agusta Brutale 1090RR by loosening the screws that secure it to its housing on the side of the handleb…

How to Replace the Coolant in the Piaggio Medley 125?

To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant.

Watch the video!


by ScegliAuto

More videos