Do it yourself
Frequently asked questions about cars and motorcycles
To change the engine oil on a MV Agusta F3 675, loosen the drain plug located at the bottom of the vehicle: once this plug is removed, you can collect all the used oil in a suitably positioned container. Next to the drain plug, you will find the oil filter cover, which can be removed to take out the filter from its housing: at this point, you can insert the new filter and proceed with topping up by pouring oil through the breather located on the right side of the bike.

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

F3 675 In this brief guide, we will see how to change the engine oil while performing the regular maintenance service on the MV Agusta F3 675. First, remove…
F3 675 To change the engine oil on the MV Agusta F3 675, loosen the drain plug located at the bottom of the bike. Once the plug is removed, collect all the …
F3 675 In order to replace the battery of the MV Agusta F3 675, you will need to loosen the screws that secure the panel located on the left side of the bik…

How to Replace the Front Headlight on the KTM XC 300

In this guide, we will look at the main instructions on how to remove and replace the front headlight of the KTM XC 300. First, place your bike on a stand and begin removing the original headlight. To do this, remove the side straps and unscrew the fixing screws, then disconnect the electrical connector of the bulb. At this point, install the new optical unit (in this case, a LED type is being installed); if necessary, modify the wiring and then reassemble the headlight and the plastic cover, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos