Do it yourself
| ||||
|
Model: Mvagusta Dragster 800
To remove the rear wheel of the MV Agusta Dragster 800, you need to loosen the bolts that secure the rear sprocket so that it can be completely detached along with its chain. Afterwards, you can loosen the bolts that secure the brake caliper to its disc, allowing the caliper to be removed from its housing. Now, the nut securing the central axle can be loosened, allowing the axle to be pulled out and the corresponding wheel to be removed. At this point, you can insert the new replacement part and reassemble all the previously removed components.
Posted on 28 November 2023 by ScegliAuto
|
How to replace the battery on the Honda X-ADV 750 2018This guide will explain the battery replacement procedure for the Honda X-ADV 750 from 2018 onwards. Here are the steps that need to be taken: 1. Move the wheel located on the handlebar on the left, towards "Seat"; 2. Lift the saddle and remove the various gaskets and plastic supports below; 3. With a plastic tool and a wrench, remove the remaining screws and pins by applying a slight pressure during the lever, without forcing particularly; 4. Unscrew the last screws of the positive and negative and the relative strap that keeps the battery tied to its seat; 5. Remove the battery to be replaced; 6. Check that the new spare battery has the same voltage and amperage to avoid electrical problems; 7. Reassemble everything by following the steps described in reverse. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |