Do it yourself
Frequently asked questions about cars and motorcycles
To replace the exhaust of the MV Agusta Dragster 800, loosen the screws that secure the exhaust to the upper support and the one that secures the clamp connecting the exhaust to the remaining part of the exhaust pipe. Once the old exhaust is removed, position the new one in its housing: it should then be connected to the exhaust via the previously removed clamp, and you will also need to insert the upper support bolt. Finally, check that everything functions correctly.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Dragster 800 It will be possible to replace the exhaust of the MV Agusta Dragster 800 RC by loosening the screws that secure the exhaust terminal to its housing o…
Dragster 800 To replace the exhaust on the MV Agusta Dragster 800, loosen the screws securing the piece at the rear, near the rear mudguard. Once the screw fixing…
Dragster 800 The exhaust pipe of the MV Agusta Dragster 800 can be replaced by loosening the screws that secure the component on the back, near the fender on the …

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos