Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Start an MV Augusta F4R?

Model: Mvagusta F4r
Part: Checks and maintenance

Video tutorial

To start an MV Augusta F4R, follow these steps. Ensure the bike is in neutral and the side stand is up. Locate the ignition button, usually found on the right side of the handlebars.

Make sure the ignition key is properly inserted into the ignition switch. Turn the key to the "ON" position.

Once done, press and hold the start button, typically located on the right side of the handlebars, until the engine starts. You will hear the engine fire up and the bike will be ready to ride.

During this process, check the dashboard to ensure all warning lights illuminate correctly and there are no signs of errors or malfunctions. Always wear protective gear before starting and riding your MV Augusta F4R to ensure your safety on the road.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

How to Reset the Trip Meter on an MV Augusta Brutale 800
How to Reset the Trip Meter on an MV Augusta Brutale 800
Brutale 800 Before you begin, sit on the seat of your MV Augusta Brutale 800 and lift the side stand. Start by turning the ignition key to switch on the instrume…
How to Replace the Engine Oil Filter on an MV Augusta Brutale 1078
How to Replace the Engine Oil Filter on an MV Augusta Brutale 1078
Brutale 1078 Before starting, position your MV Augusta Brutale 1078 upright using the appropriate motorcycle stand, and then run the engine for a few minutes. Beg…
How to Change the Engine Oil in a MV Augusta Brutale
How to Change the Engine Oil in a MV Augusta Brutale
Brutale 800 Before you start, position your MV Augusta Brutale upright using a motorcycle stand. To effectively drain the used engine oil, run the engine for a f…

How to change the engine oil in a Harley-Davidson Road King?

In this tutorial, you will see how to change the engine oil in a Harley-Davidson Road King, a very simple and quick operation. First, ensure the engine is cool enough to work safely, then position a container under the bike, locate the drain plug, and unscrew it using a 16mm socket. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the new filter and the drain plug. At this point, simply pour the required amount of oil through the designated top hole.

Watch the video!


by ScegliAuto

More videos